塗善東

塗善東

塗善東,祖籍廣東省大埔縣。1961年11月出生于福建省永定縣。博士、教授、長江學者(2001)、國家傑出青年基金得主(2002)。

中國機械工程學會壓力容器分會榮譽理事長、材料分會榮譽理事長,諾丁漢大學榮譽教授 。曾任華東理工大學副校長。

  • 中文名稱
    塗善東
  • 出生地
    福建省永定縣
  • 出生日期
    1961年11月
  • 職業
    華東理工大學副校長、教授
  • 畢業院校
    南京化工學院
  • 主要成就
    2006年獲教育部榮譽長江學者稱號

簡介

塗善東塗善東

塗善東,博士、教授、長江學者(2001)、國家傑出青年基金得主(2002)。1988年于南京化工學院化工機械專業獲工學博士學位,1989年-1990年在西南交通大學力學所從事博士後研究工作,1990年-1993年受邀擔任瑞典皇家理工學院客席科學家(Guestscientist),1993年-2001年擔任南京化工大學、南京工業大學副校長、機械工程學院副教授、教授、院長,1998年6月-12月韓國中央大學訪問教授(Brainpoolscholar),2001年11月起擔任華東理工大學化工過程機械學科教育部“長江學者獎勵計畫”特聘教授,2006年6月迄今擔任華東理工大學副校長。

兼任國際壓力容器學會亞太地區委員、國際機構學與機器科學聯合會(IFToMM)可靠性委員會委員、中國機械工程學會壓力容器學會榮譽理事長、材料學會理事長;他還擔任了JAppliedEnergy,IntJofPresVesandPiping,JofMaterialsScience&Technology,FrontierofMechanicalEngineeringinChina,AdvancesinMechanicalEngineering、壓力容器、機械工程材料等期刊、機械強度、功能材料及器件學報等期刊編委。

研究

高溫環境下的結構設計理論與壽命預測技術、微(小)化學機械系統(MCMS)、先進能源材料與裝備,倡導全面工程教育

獲獎成果

​發表學術期刊論文200餘篇,出版中英文著作和文集8本。

2004年(第一完成人)、1999年(第二完成人)先後兩次獲國家科技進步二等獎,

2009年獲國家教學成果二等獎,

多次獲省部級一等獎;

1990年獲第二屆中國青年科技獎,

1996年入選國家百千萬人才工程、

2002年被授予中華全國歸國華僑聯合會“科技進步帶頭人”稱號,獲國家傑出青年科學基金,

2006年獲教育部榮譽長江學者稱號。。

論著

1. Wang N, Tu ST, Xuan FZ. (2013). "A novel prediction method of creeprupture life of 9-12% chromium ferritic steel based on abductive network."Engineering Failure Analysis.

2. Xu JS, Zhang XC, Xuan FZ, Tian FQ, Wang ZD, Tu ST. (2013). "Tensileproperties and fracture behavior of laser cladded WC/Ni composite coatings withdifferent contents of WC particle studied by in-situ tensile testing."Materials Science and Engineering a-Structural Materials PropertiesMicrostructure and Processing 560: 744-751.

3. Wen JF, Tu ST, Gao XL, Reddy JN. (2013). "Simulations of creepcrack growth in 316 stainless steel using a novel creep-damage model."Engineering Fracture Mechanics 98: 169-184.

4. Wang HT, Wang GZ, Xuan FZ, Tu ST. (2013). "Fracture mechanism of adissimilar metal welded joint in nuclear power plant." Engineering FailureAnalysis 28: 134-148.

5. Wang HT, Wang GZ, Xuan FZ, Tu ST. (2013). "An experimentalinvestigation of local fracture resistance and crack growth paths in adissimilar metal welded joint." Materials & Design 44: 179-189.

6. Wang HT, Wang GZ, Xuan FZ, Liu CJ, Tu ST. (2013). "Local mechanicalproperties of a dissimilar metal welded joint in nuclear powersystems."Materials Science and Engineering: A 568: 108-117.

7. Tan JP, Tu ST, Wang GZ, Xuan FZ. (2013). "Effect and mechanism ofout-of-plane constraint on creep crack growth behavior of a Cr–Mo–Vsteel." Engineering Fracture Mechanics 99: 324-334.

8. Huang YH, Tu ST, Xuan FZ. (2013). "Modeling and simulation of pitchemistry of 304 austenitic stainless steel under applied stress in sodiumchloride solution." Nuclear Engineering and Design 257: 45-52.

9. Gong N, Wang GZ, Xuan FZ, Tu ST. (2013). "Leak-before-breakanalysis of a dissimilar metal welded joint for connecting pipe-nozzle innuclear power plants." Nuclear Engineering and Design 255: 1-8.

10. Chen LY, Wang GZ, Tan JP, Xuan FZ, Tu ST. (2013). "Effects ofresidual stress on creep damage and crack initiation in notched CT specimens ofa Cr–Mo–V steel." Engineering Fracture Mechanics 97: 80-91.

11. Zhu ML, Xuan FZ, Du YN, Tu ST. (2012). "Very high cycle fatiguebehavior of a low strength welded joint at moderate temperature."International Journal of Fatigue 40: 74-83.

12. Yuan BX, Luan WL, Tu ST. (2012). "One-step synthesis of cubic FeS2and flower-like FeSe2 particles by a solvothermal reduction process."Dalton Transactions 41(3): 772-776.

13. Yuan BX, Luan WL, Tu ST. (2012). "One-step solvothermal synthesisof nickel selenide series: Composition and morphology control."Crystengcomm 14(6): 2145-2151.

14. Yuan BX, Hou XQ, Han YL, Luan WL, Tu ST. (2012). "Facile synthesisof flake-like FeSe2 particles in open-air conditions." New Journal ofChemistry 36(10): 2101-2105.

15. Yang XB, Tu ST. (2012). "The effect of a constraining metal tube onflux pinning induced stress in a long cylindrical superconductor." Journalof Applied Physics 112(2): 023909.

16. Yang XB, Tu ST. (2012). "Stresses from Oxide Film ImperfectionsDuring Metal Dusting." Oxidation of Metals 78(5-6): 295-305.

17. Xu JS, Zhang XC, Xuan FZ, Wang ZD, Tu ST. (2012). "Microstructureand sliding wear resistance of laser cladded wc/ni composite coatings withdifferent contents of wc particle." Journal of Materials Engineering andPerformance 21(9): 1904-1911.

18. Wang GZ, Li BK, Xuan FZ, Tu ST. (2012). "Numerical investigation onthe creep crack-tip constraint induced by loading configuration ofspecimens." Engineering Fracture Mechanics 79: 353-362.

19. Tan JP, Wang GZ, Xuan FZ, Tu ST. (2012). "Correlation of creepcrack-tip constraint between axially cracked pipelines and testspecimens." International Journal of Pressure Vessels and Piping 98:16-25.

20. Sun PJ, Wang GZ, Xuan FZ, Tu ST, Wang ZD. (2012)."Three-dimensional numerical analysis of out-of-plane creep crack-tipconstraint in compact tension specimens." International Journal ofPressure Vessels and Piping 96-97: 78-89.

21. Sun L, Luan WL, Shan YJ, Tu ST. (2012). "One-step synthesis ofmonodisperse Au-Ag alloy nanoparticles in a microreaction system."Chemical Engineering Journal 189: 451-455.

22. Lv YX, Yu XH, Tu ST, Yan JY, Dahlquist E. (2012). "Experimentalstudies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fibermembrane contactor." Applied Energy 97: 283-288.

23. Lv YX, Yu XH, Jia JJ, Tu ST, Yan JY, Dahlquist E. (2012)."Fabrication and characterization of superhydrophobic polypropylene hollowfiber membranes for carbon dioxide absorption." Applied Energy 90(1):167-174.

24. Luan WL, Yang HW, Wan Z, Yuan BX, Yu XH, Tu ST. (2012)."Mercaptopropionic acid capped CdSe/ZnS quantum dots as fluorescence probefor lead(II)." Journal of Nanoparticle Research 14(3)

25. Liu ZD, Zhang XC, Xuan FZ, Wang ZD, Tu ST. (2012). "In situsynthesis of TiN/Ti3Al intermetallic matrix composite coatings on Ti6Al4Valloy." Materials & Design 37: 268-273.

26. Lin Y, Yu XH, Wang ZY, Tu ST, Wang ZD. (2012). "Laminar flowdiffusion interface control in a microchannel with accurate Ramanmeasurement." Chemical Engineering and Processing 57-58: 1-7.

27. Jiang WC, Zhang YC, Woo W, Tu ST. (2012). "Three-dimensionalsimulation to study the influence of foil thickness on residual stress in thebonded compliant seal design of planar solid oxide fuel cell." Journal ofPower Sources 209: 65-71.

28. Jiang WC, Xu XP, Gong JM, Tu ST. (2012). "Influence of repairlength on residual stress in the repair weld of a clad plate." NuclearEngineering and Design 246: 211-219.

29. Jiang WC, Woo W, Wang BY, Tu ST. (2012). "A study of residualstress in the repair weld of stainless steel clad plate by neutron diffractionmeasurement and finite element method." Acta Metallurgica Sinica 48(12):1525-1529.

30. Jia YF, Xuan FZ, Tu ST. (2012). "A modified analysis forthermal-mechanical properties of staggered structure in biomimeticmaterials." Journal of the Mechanical Behavior of Biomedical Materials 16:109-120.

31. Jia JH, Hu XY, Wang N, Tu ST. (2012). "Test verification of anextensometer for deformation measurement of high temperature straightpipes." Measurement 45(7): 1933-1936.

32. Hu MH, Tu ST, Xuan FZ, Xia CM, Shao HH. (2012). "Strain energynumerical technique for structural damage detection." Applied Mathematicsand Computation 219(5): 2424-2431.

33. Fu HH, Luan WL, Yuan BX, Tu ST. (2012). "Nanocrystal/Polymer SolarCell." Progress in Chemistry 24(9): 1837-1844.

34. Fu HH, Luan WL, Tu ST. (2012). "A simple route for synthesis ofPbSe nanocrystals: Shape control by ligand and reaction time." DaltonTransactions 41(39): 12254-12258.

35. Fu HH, Choi MJ, Luan WL, Kim YS, Tu ST. (2012). "Hybrid solar cellswith an inverted structure: Nanodots incorporated ternary system."Solid-State Electronics 69: 50-54.

相關詞條

其它詞條